A wide range of Air Cored and E-Cored inductors is manufactured to suit the specific requirements of system builders. A coding system
has been adopted for ease of ordering as it completely specifies the electrical characteristics of the inductor as well as termination style, bobbin and tape wrap which
saves having to specify all these at the time of ordering. If you cannot find what you require in the following lists an inductor can be made to special order for quantities of 20
or more. It will then be allocated a code and added to this list.
Air Cored Inductors (Continued) |
||||
Details: All air cored chokes are wound onto circular nylon bobbins. Bobbin dimensions given below state the bobbin outer diameter followed by the height. Leadout lengths are given below - the last 30mm of the leadout is tinned. STL is shorthand for Short Tinned Leadouts which are intended for pcb mounting. The STL is fully tinned and is approximately 30mm long. Please note that A169 is an autotransformer for use with a tweeter. |
||||
Code |
mH |
ohms |
Bobbin |
Leadout Length |
A302 |
4 |
1 |
70x25.0 |
STL |
A303 |
0.8 |
0.8 |
40x17.5 |
STL |
A304 |
2.5 |
1.6 |
58x15.0 |
STL |
A305 |
5.2 |
0.9 |
70x60.0 |
150 MM |
A306 |
0.27 |
0.3 |
40x17.5 |
STL |
A307 |
5.14 |
2.3 |
58x15.0 |
STL |
A308 |
2.2 |
0.7 |
58x25.0 |
100 MM |
A309 |
1.2 |
0.4 |
58x25.0 |
100 MM |
A310 |
0.27 |
0.3 |
30x17.5 |
100 MM |
A311 |
2.8 |
0.4 |
70x45.0 |
100 MM |
A312 |
1.9 |
0.5 |
70x25.0 |
100 MM |
A313 |
1.25 |
0.35 |
70x25.0 |
100 MM |
A314 |
1.8 |
0.9 |
58x15.0 |
STL |
A315 |
3.3 |
0.9 |
70x25.0 |
STL |
A316 |
1.4 |
0.4 |
58x25.0 |
100 MM |
A317 |
0.24 |
0.6 |
30x17.5 |
STL |
A318 |
0.3 |
0.7 |
30x17.5 |
STL |
A319 |
0.35 |
0.13 |
40x17.5 |
STL |
A320 |
0.08 |
0.09 |
30x17.5 |
STL |
A321 |
0.35 |
0.4 |
40x17.5 |
100 MM |
|
Click "arrows" to navigate around this area