APPLICATION:

 

UPPER MIDRANGE/TREBLE HORN IN LARGE PA SYSTEMS

FEATURES: The VH2 horn is a flat fronted constant directivity horn with dimensions related to the VH10 allowing modular usage. The design enables full off axis output to be maintained up to 20KHz thus eliminating the need for supertweeters. It has a particularly sweet and smooth sound.

It is ruggedly made from fibreglass and a non resonant laminate to reduce colouration at high sound levels. The front flange and rear flanges are dimpled for drilling out the fixing holes and two or three hole compression driver mountings.

SPECIFICATIONS:

 

Frequency Range	900-20,000 Hz
Vertical Radiation Angle	+ 200
Horizontal Radiation Angle	+ 450
Cut-off Frequency	800 Hz
Width mm	570
Height mm	180
Depth without driver mm	270
Throat mm	25

APPLICATION:

 

LOWER MIDRANGE IN LARGE PA SYSTEMS

FEATURES: The VH10 planar  horn is a unique controlled pattern lower midrange device offering exceptional maximum SPL and bandwidth. It incorporates a special phase bung to match the Volt M2500.1 10" midrange unit. It uses a sandwich construction of fibreglass and a non resonant laminate to eliminate colouration at high outputs. A wooden mounting panel for the M2500.1 is moulded in to allow the weight of the driver to be taken by the enclosure. The front flange is dimpled for drilling out the fixing holes.This horn is dimensionally related to the VH2.

SPECIFICATIONS:

 

Frequency Range	250-1800 Hz
Vertical Radiation Angle	+200
Horizontal Radiation Angle	+350
Cut-off Frequency	250 Hz
Efficiency with M2500.1	106dB/W @ 1m
Width mm	570
Height mm	360
Depth without driver mm	412
For use with	M2500.1

APPLICATION:

 

UPPER MIDRANGE/TREBLE HORN IN PA SYSTEMS

FEATURES: The VH4 horn is a compact, flat fronted constant directivity horn. It has a wide and very even dispersion pattern optimised for use in compact, two way systems.Sound quality is particularly smooth and free from harshness at high levels.

It is ruggedly made from fibreglass and the front flange is dimpled for drilling out the fixing holes. The rear flange is dimpled for two and three bolt compression driver mounting bolts. This horn has the same width as the standard Volt 250mm chassis.

SPECIFICATIONS:

 

Frequency Range	800-20,000 Hz
Vertical Radiation Angle	+250
Horizontal Radiation Angle	+450
Cut-off Frequency	700 Hz
Width mm	262
Height mm	145
Depth without driver mm	148
Throat mm	25

We reserve the right to amend specification without prior notice.
Distributed in England by Volt Loudspeakers Ltd.

We reserve the right to amend specification without prior notice.
Made in England by Volt Loudspeakers Ltd.